E-9
ALARM OPERATION
SETTING THE ALARM TIME
1.
With the unit in standby mode and the alarm off, press and hold the ALARM SET Button.
“ALARM” icon is displayed flashing with hour digits to prompt for input.
Tap the TIME +/- Buttons repeatedly and release until the correct hour is displayed.
Note:
Make sure the hour is set so that AM or PM is correctly displayed. There is a
PM
Indicator
located in the upper left corner of the LCD display. If the PM Indicator is showing on the display, the
displayed time is “PM”. If the PM Indicator is not showing on the display, the time displayed is “AM”.
2.
Press the ALARM SET button to confirm the hour setting, minute digits are flashing to prompt for
input.
3.
Tap the TIME +/- Buttons repeatedly until the correct hour is displayed.
4.
Tap the ALARM SET button to finish alarm clock setting, “ALARM” icon keeps displaying.
CHECKING THE ALARM TIME
Whenever you want to check the alarm time, simply tap the ALARM SET Button to turn off alarm and
tap the button again to turn it ON. The “ALARM” icon appears. The Display will show the alarm time for
few seconds and then return to the current time.
WAKE TO RADIO
1. Set the FUNCTION Selector to “RADIO” and turn on the unit.
2. Select the band, station, and volume level that you wish to hear when the alarm comes 'On'.
3. Make sure the “ALARM” icon appears in display. If no, tap the ALARM SET button to turn it on.
4. The radio will turn 'On' at the selected wake up time
for 30 minutes
. “ALARM” icon will blink while
the alarm sounds.
5. To stop the radio, press the
or ALARM SET button. The radio will stop but the alarm remains set
and will turn the radio on again at the same time on the following day.
6. If you do not want the alarm to turn the radio on the following day, tap the ALARM SET button until
“ALARM” icon disappears from display.
WAKE TO CD
1. Load an audio CD into the CD compartment.
2. Set the FUNCTION Selector to the “CD” position and turn on the unit, CD will start playback.
3. Set volume level that you wish to hear when the alarm comes 'On'.
4. Make sure the “ALARM” icon appears in display. If no, tap the ALARM SET button to turn it on.
5. The CD player will turn 'On' at the selected wake up time for
30 minutes.
“ALARM” icon will blink
while the alarm sounds.
Note:
Please make sure a playable audio CD is correctly loaded if you set Wake to CD, otherwise
wake to CD alarm will not sound at the selected wake up time.
6. To stop the alarm, press the
or ALARM SET button. The alarm will stop but the alarm remains
set and will turn the CD player on again at the same time on the following day.
7. If you do not want the alarm to turn the alarm on the following day, tap the ALARM button until
“ALARM” icon disappears from display.
WAKE TO BEEPING ALARM
1. Set the FUNCTION Selector to the “ALARM” position.
2. Make sure the “ALARM” icon appears in display. If no, tap the ALARM SET button to turn it on.
3. At the selected wake up time the beeping alarm will sound. “ALARM” icon will blink while the alarm
sounds. The alarm will sound for
30 minutes
.
4. If you want to listen to the radio or CD after wake up, switch the FUNCTION Selector to “RADIO” or
“CD” position.
5. To stop the alarm, tap the
or ALARM SET button. The beeping alarm will stop but the alarm
remains set and will turn the beeper on again at the same time on the following day.
6. If you do not want the alarm to turn the beeping alarm on the following day, tap the ALARM SET
button until “ALARM” icon disappears from display.
