E-3
•
Places exposed to direct sunlight or close to heat radiating appliances such as
SAVE THESE INSTRUCTIONS
IMPORTANT NOTE:
Avoid installing the unit in locations described below:
electric heaters.
•
Places subject to constant vibration.
•
Sources of electrical noise such as fluorescent lamps or motors.
•
In case of malfunction due to electrostatic discharge, the apparatus has to be reset by
disconnecting it from mains supply and removing all the batteries. Wait at least for 60 seconds
before reconnect the AC power cord or reinstall the batter
CAUTION
Note:
This product complies with DHHS Rule 21 Subchapter J at date of manufacture.
Follow the advice below for safe operations.
ON PROTECTION AGAINST LASER ENERGY EXPOSURE
• As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to
disassemble the casing.
• Stop operation immediately if any liquid or solid object should fall into the cabinet.
• Do not touch the lens or poke at it. If you do, you may damage the lens and the player may not
operate properly.
• Do not put anything in the safety slot. If you do, the laser diode will be ON when the CD door is still
open.
• If the unit is not to be used for a long period of time, make sure that all power sources are
disconnected from the unit. Remove all batteries from the battery compartment, and unplug the
AC-DC adaptor from the wall outlet. Make it a practice to remove the AC-DC adaptor by grasping the
main body and not by pulling the cord.
• This unit employs a laser. The use of controls or adjustment or performance of procedures other
than those specified here may result in exposure to hazardous radiation.
• Should any trouble occurs, remove the power source and refer servicing to qualified personnel.
PROTECT YOUR FURNITURE!!
This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you
operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to
avoid leaving any marks or stains on your furniture. However certain types of oil based furniture
polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave
marks or a rubber residue on the furniture.
To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive
felt pads, available at hardware stores and home improvement centers everywhere, and apply these
pads to the bottom of the rubber ‘feet’ before you place the product on fine wooden furniture.
CAUTION ON SPLASH RESISTANT:
This unit has been constructed to resist mild steam and light splashes from the shower or
bath only. It should not be operated under running water and under no circumstances
should it be fully immersed in water.
