- 10 -
immediate medical attention.
NOTE: ON NON-MAGNETICALLY SHIELDED SPEAKERS.
This unit is not magnetically shielded and may cause color distortion on the screen of some
TVs or video monitors. To avoid this, you may need to move the unit further away from the
TV or monitor if unnatural color shifts or image distortion occurs.
TURNING THE UNIT POWER ON/OFF
POWER SOURCE
AC100V-240V/50-60Hz SMPS POWER is used for the main unit and one 3V type CR2025
Lithium battery (included) for remote control. Do not attempt to operate the unit from any
other power source. You could cause damage to the unit and void your warranty.
AC Power Connection
•
Firmly and securely insert the terminal of the power cord to the AC IN port of the unit back.
•
Firmly and securely insert the AC plug of the power cord into a power outlet rated at 120
VAC/60Hz.
•
Turn on the POWER of AC power outlet,then the unit go in standby mode and the LCD
DISPLAY dim and show the current time (reference to “24:00”).
TURNING THE POWER ON/OFF
•
To turn the unit on , when the unit is standby mode, press the STANDBY Button on main unit
or remote control to turn the unit ON. The unit will turn on, and the last selected input mode
icon will show on LCD display(default mode is CD).
•
To turn the unit OFF , when the unit is power on , press the STANDBY Button again on main
unit or remote control , The LCD DISPLAY will dim and show the current time.
CD PLAYER OPERATION
PLEASE READ THIS IMPORTANT INFORMATION:
CD mechanisms used in devices like this are designed to read all commercial CDs. It will also
read self-compiled CD-R/CD-RW discs, but it may take up to 10 seconds for the actual playback
to begin. If playback does not start, it is likely due to the quality of the CD-R/RW disc and/or the
compatibility of the CD compilation software. The manufacturer is not responsible for the
playback quality of CD-R/RW discs.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.
PLAYING A CD
•
Press the STANDBY Button on main unit or remote control to turn on the unit.
•
Rotate and press the SOURCE Button on main unit or remote control to select CD mode. “C D”
icon turns on, the display will show “C D” form flashing to steadily.
•
Press the EJECT Button to insert an audio CD.
•
the unit starts to read the disc, “LOAD” shows in display and flashing. After few seconds, the
total number of tracks show on the LCD display.
•
Touch the PLAY/PAUSE Button on main unit or remote control to play, play indicator icon
shows in display, the CD will start playing from first track.
•
To pause playback, press touch the PLAY/PAUSE Button on main unit or remote control. The
track time will be paused and pause indicator icon will show in display. To resume playing,
please touch the PLAY/PAUSE Button again.