![background image](http://html1.mh-extra.com/html/jensen/jbs-215/jbs-215_user-manual_3742796008.webp)
E-7
AC POWER OPERATION
The JBS-215 operates on 120V~ 60Hz AC power using the included AC-DC Adaptor with the
output of DC 5V 3A .
1. Firmly and securely insert the DC plug of the adaptor
into the DC Jack on the back of the unit.
2. Plug the adaptor’s AC plugs into
a household power outlet rated
at 120V~ 60Hz. Connecting this
system to any other power
source may cause damage to
the system.
Remote Control
The remote control operates on one CR2025 battery (included). To activate
the remote control, remove the insulation tab inserted in the battery
compartment.
When the operation of the remote control becomes intermittent or weak,
replace the original battery with a new 3-volt lithium battery.
1. Slide out the battery holder from the remote control case.
2. Replace the 3V CR2025 battery. Be sure the battery is installed
correctly. The remote will not work if the battery is installed with the
wrong polarity.
CAUTION
1. Make sure the correct polarity of battery to be installed.
2. Make sure you dispose of batteries properly (refer to your local
regulations).
3. Do not open batteries.
4. Do not dispose of batteries in fire.
5. Do not heat up batteries.
6. Do not expose batteries to water.
7. Do not charge or recharge batteries.
WARNING
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
The remote control supplied with this product contains a coin/button cell battery. If the
coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can
lead to death.
Keep new and used batteries away from children. If the battery compartment does not close
securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
GETTING STARTED