E-13
1. Tap the POWER/ SOURCE BUTTON (#1) to turn on the unit.
2. Tap the POWER/ SOURCE BUTTON (#1) repeatedly to select the CD mode.
3. Press OPEN/CLOSE BUTTON (#12) to open the CD door and carefully place an
audio CD / MP3 CD with its label side upward in the CD compartment and press
OPEN/CLOSE BUTTON (#12) to close the CD door.
4. The player will start reading TOC of the disc.
5. The total number of tracks on the CD will appear on the LCD DISPLAY after a few
seconds. MP3 CD will take some more time.
6. Tap the PLAY/PAUSE BUTTON (#7) to start to play.
7. Adjust the VOLUME - / ((#10 / #11) to obtain the desired volume level.
8. To suspend playing, tap the PLAY/PAUSE BUTTON (#7) again. To resume playing,
tap the PLAY/PAUSE BUTTON (#7) again.
9. You can choose to play your favorite track directly by tap the BUTTON (#5) /
BUTTON (#8). The LCD Display will indicate the correct track number selected.
10. To locate a particular section within a track, press and hold the BUTTON (#5) /
BUTTON (#8) until the section is found.
11. To repeat a particular track, tap the PLAY MODE BUTTON (#4) repeatedly until the
REP
1
icon lights on the LCD DISPLAY (#15).
12. To repeat the entire CD, tap the PLAY MODE BUTTON (#4) repeatedly until the
REP
ALL
icon lights on the LCD DISPLAY (#15).
13. To repeat the random track, tap the PLAY MODE BUTTON (#4) repeatedly until the
RAND
icon lights on the LCD DISPLAY (#15).
14. To stop playing, tap the BUTTON (#6).
15. Press and hold the POWER/ SOURCE BUTTON (#1) to turn off the unit.
PROGRAM OPERATION
This function allows the tracks to be played in a programmed sequence. Programs can be set
in STOP mode.
1. Tap the POWER/ SOURCE BUTTON (#1) to turn on the unit.
2. Tap the POWER/ SOURCE BUTTON (#1) repeatedly to select the CD mode.
3. Tap the PROG BUTTON (#3) once. The PROG icon and program number "P01" will
show on the LCD DISPLAY (#15).
4. Tap the BUTTON (#5) / BUTTON (#8) repeatedly to select the track to be
programmed.
5. Tap the MEM/PROG BUTTON (#3) again to store selection. The Program Channel No.
will change to P02.
6. You may repeat steps 4 - 5 to program as many as 20 tracks.
7. Tap the BUTTON (#7) to start the programmed play.
8. You may tap the PLAY MODE BUTTON (#4) repeatedly to select REP 1 or REP ALL
programmed tracks.
9. Tap STOP BUTTON (#6) once to stop playback.
10. Tap the BUTTON (#7) to resume programmed play.
11. To cancel programmed play and, press the STOP BUTTON (#6) twice.
