Jensen DMR2116, Руководство пользователя

Страница: 23 / 80

23
DMR2116
RADIOOPERATION
ChoosingaRadioBand
Press the
SRC
button on the faceplate to select radio mode. The radio frequency
appears in the display panel together with the frequency memory band (FM1,
FM2, FM3, AM1 or AM2).
The unit has five preset memory bands - three FM Bands (FM1, FM2, and FM3) and
two AM Bands (AM1 and AM2). Each of the five bands can store up to six preset
stations, for a total of 30 preset memory stations.
SelectingtheFrequencyBand
In radio mode, press the
BAND
button on the faceplate to select the desired band.
The reception band will change in the following order:
FM1
FM2 FM3 AM1 AM2
RadioTune/SeekFunction
In radio mode, press and hold the or button for 2 seconds. ”MANUAL”
appears on the display panel. Press the or button once to manually
adjust the radio frequency.
Tuning
Press the or button once. The radio will seek the next strong and clear
frequency station. Repeat to seek more stations with a strong signal in your
listening area.
Mono/StereoReceptionControl
The reception of distant stations may be improved by selecting “MONO” operation.
“MONO” operation may cut down some reception noise.
1. In FM radio mode, press the volume knob until “STEREO” appears on the
display panel.
2. Rotate the volume knob to select “STEREO” or “MONO”.
Local/DistanceControl
The local and distance reception setting can improve radio reception, depending
on the location where the radio is being used.
1. In FM radio mode, press the volume knob until “LOC ON” appears on the
display panel.
2. Rotate the volume knob to select “LOC ON” or “LOC OFF”.