background image

15

If you experience difficulties in the use of this system please check the 
following before calling 1-800-777-5331 for Customer Service and Support.

TROUBLESHOOTING GUIDE

Noise or sound 
distorted on AM or 
FM broadcast

Station not tuned properly for 
AM or FM.
FM: Telescopic antenna is not 
        fully extended.
AM: The bar antenna is not 
        positioned  correctly

Retune the AM or FM 
broadcast station.
FM: Fully extend and rotate  
       the telescopic  antenna 
AM: Reposition the unit until 
        the best reception is 
        obtained.

AM or FM no 
sound

Unit not in AM or FM mode.
Volume set at minimum

Slide Function Switch to AM or 
FM position
Increase Volume

CD player will not 
play

Unit not in CD function mode.
CD is installed incorrectly. 
If the CD is self-compiled, the 
media used may not be 
compatible with the player.

Select CD function mode.
Insert CD with label side up.
Use better quality blank media 
and retest.

USB will not play

Unit not in CD function mode
USB function is not selected

Select CD function mode.
Press SOURCE to change 
from CD to USB mode.

SD Card will not 
play 

Unit not in CD function mode
SD function is not 

Select CD function mode.
Press DISC/USB/SD  to 
change from CD to SD mode.

CD skips while 
playing

Disc is dirty or scratched

Wipe CD with clean cloth or 
use another disc.

Intermittent 
sound from CD 
Player

Dirty or defective disc
Dirty pick up lens
Player is subject to excessive 
shock or vibration

Clean or replace the defective 
disc
Use a CD-lens cleaning disc to 
clean the lens
Relocate the player away from 
shock or vibration

No sound when 
played in the AUX 
Mode 

Power to external source (CD, 
MP3 etc) not switched on
Connection to external source 
(CD, MP3 etc) is incorrect: e.g. 
Audio cable may have been 
inserted to AUX IN of external 
source.
Volume Control is at minimum.

Switch on the power of the 
external source.
Reconnect the audio cable to 
the LINE OUT of the external 
source.
Adjust both the volume 
controls of CD-477 and that of 
the external source.

The Remote 
Control does not 
work

Battery is inserted incorrectly
Check the battery if it is worn

Insert Battery correctly
Replace the battery if it is worn

Symptom

Possible Cause

Solution

Содержание CD-750



















Отзывы: