Note:
i.
USB media is hot-swappable, meaning it can be inserted and removed
at any given time when not in use. The unit may malfunction if the USB
or SD Card is removed suddenly in the middle of playing an audio file, so
always make sure the STOP button is pressed before removing the USB
or SD Card from the slot.
ii.
If the CD-750 malfunctions or does not operate normally, perform a
reset by switching the unit off and on once.
This unit allows you to encode audio tracks from an audio CD and convert
them into MP3 format files. You can also copy MP3 files and to save them to a
USB Flash Drive or an SD Memory Card.
CD RIPPING
1.
In CD Playback mode, insert a USB Flash Drive* or a Flash Memory
Card* into the relevant slot,
2.
Press " " or " " to locate the track you wish to encode then press the
"
ENCODE"
Button on the front panel once. The Copy Indicator,
ENCODE, flashes, and
"CD"
in the LCD Display flashes as well,
indicating that encoding is being processed.
3.
To stop encoding, press "STOP" once. "STOP" appears in the LCD
Display. If "STOP" is not pressed during the encoding process, the
successive tracks will be encoded one by one. CD-750 will stop when
the last CD track has been encoded. “STOP” will appear on the Display.
Note: If you monitor the audio during the MP3 encoding process, you
may hear breaks in the audio playing trough the speakers. This is
normal and does not affect the audio quality of the final MP3 file that is
produced.
We suggest you turn the volume off during the MP3 encoding process
and only monitor the audio to check the progress of the song being
converted.
CD RIPPING AND MP3 FILE COPYING
