6.
Do not dispose of batteries in fire, batteries may leak or explode.
7.
Remove exhausted batteries from the unit, dispose promptly and
properly.
B. AC OPERATION
1.
Turn ON the CD-750 by pressing the POWER Button. The Power
indicator will light.
2.
Set the Band Selector on the right hand side of CD-750 to AM or FM.
3.
Rotate the Tuning Control to the station you want to listen to. The station
frequencies are marked on the dial scale and can be seen trough the
window on the Tuning Control knob.
4.
For FM Stereo reception, set the Function Selector on the left hand side
of CD-750 to FM STEREO. The FM STEREO Indicator will light if an FM
stereo broadcast is received.
5.
To receive a weaker (noisy) FM station, set the Function selector to the
“MONO” position. The reception may be improved, but the sound is
monaural (MONO).
6
.
Adjust the volume by turning the VOLUME Control.
7.
Switch off the radio by pressing the POWER Button again. The POWER
Indicator will turn off.
TIPS FOR BEST RADIO RECEPTION
1.
FM Reception - Fully extend and rotate the Telescopic Antenna for the
best FM reception.
2.
AM Reception - The AM antenna is located inside the CD-750 cabinet. If
AM reception is weak, change the position of cabinet until the internal
antenna picks up the strongest signal
LISTENING TO RADIO
Insert one end of the AC adaptor (Included) into the DC Jack on the back of
the CD-750 and plug the AC adaptor end into a wall outlet with a 120V
~
60Hz
power supply. The CD-750 will automatically disconnect the batteries and
operate from the AC Power adaptor.
