INSTALLATION INSTRUCTIONS
Step # 13
Connecting the left speaker
To connect the speakers on the left side of the game (while looking at
it from the back) connect the wires with the two pin molex
connection making sure not to push out a pin when connecting the
two sides. This is the only connection needed for this side of the
game.
Check Box When This Step is Complete
Step # 14
Connecting the Right Speaker
To connect the right side speaker (while looking at it from the back)
you will connect the wires with the two pin molex connectors making
sure not to push out a pin when connecting the two sides.
Check Box When This Step is Complete
Step # 15
Connecting the Marque LED's and control wires
Other than thespeaker connection on the right side of the cabinet you
will need to connect the power and signal wires for the Marque's LED
lights. This is the large 12 pin molex connector which you will plug into
the interface board located just under and to the right of the marque
foot mount. Please make sure that all pins are properly seat as is the
white molex to the interface board.
Check Box When This Step is Complete
Jennison Entertainment Technologies
Rocket Wheel Service Manual
Page 16
