Securing the Bracket
Step # 14
BOSE SPEAKER INSTALLATION INSTRUCTIONS
Step # 12
Attaching the Speaker Bracket
Again measure the same distance on
the right side of the sign. Minimum
distance is 3" and the maximum is 4".
Again mark the two areas where the
holes need to be drilled.
Step # 13
Secure the bracket using the included
hardware and ensure it is tight. Check to
make sure the top of the bracket is flush
with the rear of the sign.
Carefully put the back plate back onto the
rear of the sign. You may need to use your
utility knife to get the piece back into the
correct position. Slowly re-insert all 10
screws holding the back plate in place. Be
sure to not tighten the screws too tight as
the receiving nut might back out.
Re-installing the Back Plate
JET Games
Kahuna's Big Wave Service Manual
53
