INSTALLATION INSTRUCTIONS
Step # 1
PREPARING TO ASSEMBLE THE GAME
Kahuna's Big Wave will ship on a single 6' X 8' pallet. Once the game is
safely removed from the shipping pallet, carefully roll the unit to the
desired location. Please note that section 4 (marquee header) is
bolted to the top of the section 2 (main cabinet) and must be
removed before assembly.
NOTICE
PACKAGING AND PALLET MAY BE SLIGHTLY
DIFFERENT THAN SEEN IN PHOTO
Check Box When This Step is Complete
Step # 2
REMOVING SECTION # 4 FROM THE MAIN CABINET
To remove the section #4 from the main cabinet - you will need to
remove 6 Philips head M6 screws from the bottom of the inside lip of
the section #4. The top picture to the right will show how the screws
are mounted and they must be removed to prevent damage to the
Acrylic bottom. The Bottom picture to the right show the location of
all 6 screws. There are two screws on each the front left and right
sides.
Check Box When This Step is Complete
Step # 3
REMOVING SECTION # 4 FROM THE MAIN CABINET
After removing the 6 screws holding the front, left, and right sides of
the header marquee to the main cabinet you now must remove the 4
top screw from the alignment brackets on the back side of the main
cabinet. Only remove the top two screws on each side. Once this is
completed you will be ready to remove the header marquee.
Check Box When This Step is Complete
JET Games
Kahuna's Big Wave Service Manual
12
