27
Intermission™ • Copyright 2009 • Jennison Entertainment Technologies • All Rights Reserved
Test Mode
Intermission™ features a test mode to verify that certain components are functioning correctly. This feature can
be utilized to narrowing down certain technical problems or diagnosing a defective part or component.
To enter Test Mode:
1.
Push the “
SERVICE
” button for
3
seconds
a.
The machine will enter the Setup mode.
b.
Push the “
SERVICE
” Button AGAIN for
1
second.
c.
The machine will enter Test mode.
2.
The different Test Mode numbers will be displayed on the TICKETS OWED display (T01-T04)
3.
Advance through the Mode Numbers by pushing the “
TEST
” button.
4.
The context values will be displayed on the JACKPOT BONUS display. (NOTE: The default context
value should be displayed unless previously changed by the operator. Any new context selected by the
operator will be retained unless changed or unless the program is reset to defaults.)
5.
Push the “INCREASE/DECREASE” buttons located on the Intermission™ Control Panel to change the
context values.
a.
Press the
INCREASE BUTTON
to
INCREASE
the context.
b.
Press the
DECREASE BUTTON
to
DECREASE
the context.
Test Mode
Mode Number
Function
Value #
Selection
T01
INPUT
1-40
ON/OFF
T02
OUTPUT
1-48
TEST
T03
MUSIC
1-50
TEST
T04
AUTO TEST
6.
Push the “SETUP” button again to EXIT the Test Mode.
NOTICE:
DO NOT CHANGE ANY VALUES IN TEST MODE WITHOUT A COMPLETE
UNDERSTANDING OF THE TEST MODE ITSELF AND ITS VARIOUS OPTIONS.
CONTACT J.E.T. OR YOUR LOCAL DISTRIBUTOR FOR ASSITANCE WITH THIS MODE.
