25
Intermission™ • Copyright 2009 • Jennison Entertainment Technologies • All Rights Reserved
Linking Units Together – Dip Switch Settings
Intermission was designed so that up to 8 units could be linked together for increased game play and
competition. Units can be easily linked together using the parts supplied in the header installation kit. Note:
This feature only works with the Grand Jackpot Combo Bonus Header which is sold separately.
Installation Instructions:
1)
Determine how many units you will link together. One machine must be designated the Master unit. We
suggest that you designate the unit that will be located on the far left of your setup as the master unit.
Each additional unit added to the right of the Master will be designated as unit 2, 3, 4 and so forth. NIf
you will only have three units, we recommend designating the middle unit as the Master as the
communication harness was designed this way.
2)
Align all your units in one straight line and ensure all games are OFF.
3)
Locate the provided communication cable. (Each header comes standard with a cable for up to three
units). Plug the main part of the harness into the Master machine. The cable should be plugged into the
connector located on the power switch on the back of each game.
4)
Plug in the other two ends of the harness to the remaining machines. Note: If you only have two games
linked, the remaining cable does not need to be plugged into anything.
5)
Open the rear access door to each unit and locate the main board.
6)
On the Master machine, locate the main board and then locate Dip Switch 3.
7)
Change the pin configuration according to the following chart: EXAMPLE: MACHINE # 1 (
SWITCH
1=OFF
/ SWITCH 2 = OFF / SWITCH 3 = OFF /
SWITCH 4 = ON
/
SWITCH 5 = ON
/
SWITCH 6 =
ON
/ SWITCH 7 = OFF / SWITCH 8=OFF)
8)
Go to each machine in the bank series and change the pin configuration according to the unit number in
the following chart. NOTE: Each machine in the banked series will have a different pin configuration.
9)
You can check to make sure the unit number is correct by entering the SETUP mode and scrolling to
F19. The unit number will be displayed on the Jackpot Bonus SEG Display.
Pin
1
Pin
2
Pin
3
Pin
4
Pin
5
Pin
6
Pin
7
Pin
8
Test Mode
ON
−
−
−
−
−
−
−
Play Mode
OFF
−
−
−
−
−
−
−
1
−
−
−
ON
ON
ON
−
−
2
−
−
−
OFF
ON
ON
−
−
3
−
−
−
ON
OFF
ON
−
−
4
−
−
−
OFF
OFF
ON
−
−
5
−
−
−
ON
ON
OFF
−
−
6
−
−
−
OFF
ON
OFF
−
−
7
−
−
−
ON
OFF
OFF
−
−
8
−
−
−
OFF
OFF
OFF
−
−
SWITCH 3
Machine Unit
Number. (Master
Machine is Unit # 1)
Header Mode
