12
Intermission™ • Copyright 2009 • Jennison Entertainment Technologies • All Rights Reserved
Coin Comparator Setup (Continued)
Figure # 3:
Locate the comparator
mechanism. Replace the
plastic spacer token with the
coin of your choice.
Figure # 2:
Pull the mechanism out of
the napkin dispenser. Be
careful of the attached
electrical wires.
Figure # 1:
Insert key and pull the
entire coin mechanism
towards you at an angle as
shown.
Figure # 4:
Replace the mechanism
back into the napkin
dispenser by angling the
assembly so that the groove
fits into the unit as shown
Figure # 5:
Push the top portion of the
coin mechanism assembly
back into the napkin
dispenser.
Figure # 6:
Lock the assembly by
turning the key. Ensure that
the coin mechanism is
securely attached.
