180
181
____________________________________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________ __________________________________________________
____________________________________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________________________________
_______________________________________________ ____________________________________________________________________________________________________
____________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________ __
____________________________________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________________________________
_______________________________________________________________________________________________ _____________________________________________________
OPENING/CLEARANCE DIMENSIONS
FRONT VIEW
SIDE VIEW
BACK VIEW
30" WARMING DRAWERS
JWD2030WS, JWD2030WX – 29
3
⁄
4
" x 10
3
⁄
8
" x 26"
MODEL #
JWD2030WS
JWD2030WX
in
cm
A
Width of cabinet (min.)
30
76.2
B
Width of cutout
28
1
⁄
2
72.4
C
Height between cutouts (min.)
2
1
⁄
2
6.4
D
Height of cutout
9
1
⁄
8
23.2
E
Bottom of cutout to floor
(recommended)
8
1
⁄
4
21.0
Bottom of cutout to floor (min.)
5
12.7
F
Depth of cutout (min.)
24
61.0
e
Recommended outlet location
ELECTRICAL REQUIREMENTS
120 volt, 60 Hz, AC only, 15-amp fused, electrical circuit is required.
A dedicated circuit is recommended.
If the outlet is on the rear wall behind the warming drawer,
it must be recessed and located in the upper right-hand corner.
If outlet is located in an adjacent cabinet, drill a 1
3
⁄
8
" (3.5 cm)
minimum diameter hole in the side wall or support surface
to access the power supply cord.
LOCATION REQUIREMENTS
Support surface must be solid, level and flush with the bottom of
the cabinet cutout. The warming drawer must be leveled before
completing installation.
A
Back of Cabinet
F
D
C
D
E
C
A
B
C
e
B
e
A
Back of Cabinet
F
D
C
D
E
C
A
B
C
e
B
e
A
C
B
I
H
G
F
B
A
D
E
F
G
H
D
E
C
Power Cord Location
____________________________________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________ __________________________________________________
____________________________________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________________________________
_______________________________________________ ____________________________________________________________________________________________________
____________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________ __
____________________________________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________________________________
_______________________________________________________________________________________________ _____________________________________________________
OPENING/CLEARANCE DIMENSIONS
FRONT VIEW
SIDE VIEW
BACK VIEW
30" WARMING DRAWERS – FLUSH INSTALLATION
JWD2030WS, JWD2030WX – 29
3
⁄
4
" x 10
3
⁄
8
" x 24"
(depth without handle)
MODEL #
JWD2030WS
JWD2030WX
in
cm
A
Width of flush inset cutout (min.)
30
76.2
B
Width of opening (min.)
28
1
⁄
2
72.4
C
Height between cutouts (min.)
2
1
⁄
2
6.4
D
Height of opening (min.)
9
1
⁄
8
23.2
E
Height of flush inset cutout (min.)
10
25.4
F
Bottom of cutout to floor
(recommended)
8
1
⁄
4
21.0
Bottom of cutout to floor (min.)
5
12.7
G
Depth of cutout (min.)
25
63.5
e
Recommended outlet location
ELECTRICAL REQUIREMENTS
120 volt, 60 Hz, AC only, 15-amp fused, electrical circuit is required.
A dedicated circuit is recommended.
If the outlet is on the rear wall behind the warming drawer,
it must be recessed and located in the upper right-hand corner.
If outlet is located in an adjacent cabinet, drill a 1
3
⁄
8
" (3.5 cm)
minimum diameter hole in the side wall or support surface
to access the power supply cord.
LOCATION REQUIREMENTS
Support surface must be solid, level and flush with the bottom of
the cabinet cutout. The warming drawer must be leveled before
completing installation.
FLUSH INSTALLATION REQUIREMENTS
A 25" (63.6 cm) minimum cutout depth is required.
These dimensions will result in a 1
13
⁄
16
" (4.6 cm) reveal on the top, a
1
⁄
8
" (0.3 cm) reveal on the sides and a
5
⁄
16
" (0.8 cm) reveal on the
bottom of the warming drawer.
The front face of the cleats and platforms will be visible and should
be treated as a finished surface.
e
A
E
F
C
A
B
C
B
G
Side Cleat*
1" (2.5 cm)
Side Cleat*
3
⁄
4
" (1.9 cm)
Side Cleats*
7
⁄
8
" (2.2 cm)
Platform*
Back of Cabinet
G
D
e
A
E
F
C
A
B
C
B
G
Side Cleat*
1" (2.5 cm)
Side Cleat*
3
⁄
4
" (1.9 cm)
Side Cleats*
7
⁄
8
" (2.2 cm)
Platform*
Back of Cabinet
G
D
e
A
E
F
C
A
B
C
B
G
Side Cleat*
1" (2.5 cm)
Side Cleat*
3
⁄
4
" (1.9 cm)
Side Cleats*
7
⁄
8
" (2.2 cm)
Platform*
Back of Cabinet
G
D
TOP VIEW
A
C
B
I
H
G
F
B
A
D
E
F
G
H
D
E
C
Power Cord Location
* Cleats and platform must be recessed 1" (2.5 cm) from the front of the cabinet.
W
ARMING DRA
WERS