13
O
VEN
C
OOKING
A
Rapid Preheat
Use to decrease preheating time.
(select models)
B
Convect
Use for convection baking and roasting.
(select models)
C
Bake
Use for baking and roasting.
D
Broil
Use for broiling and top browning.
E
TIMER 1
Sets timer.
F
Display
Displays oven functions, options and
window time of day.
G
TIMER 2
Sets timer.
H
Number Pads
Use to enter time and temperature,
or to enter Favorites names.
I
Favorites
Use to access, program or save
baking cycles.
J
More Options
Use to access additional features.
K
Clean
Use to set self-clean cycle.
L
Setup
Use to view or change factory
default settings.
M
Warm Zone
Use to turn Warming Zone on and off.
N
Warm Drawer
Use to operate the Warming Drawer.
(select models)
O
Oven Light
Use to turn the oven light on or off.
P
CANCEL
Cancels all operations except Timer,
Clock, Favorites, Setup and Warm
Drawer.
Q
Quickset pads
Use to select options in display
window (next to display window
on both sides).
The control panel is designed for ease in programming. The display window shows options for each function and moves from step
to step through the programming process. Control panel features vary by model. Oven display above is programmed for a bake
operation.
A B C D
E F G H
Control Panel
Quickset Pads
Quickset pads are located on each side of the display window
and are used to select the desired function or option in the
display window. To select the option or function, press the
Quickset
pad next to the word.
Important:
Four seconds after entering the function,
option, number or letter, the function will automatically be
entered. If more than 30 seconds elapse between steps in
programming, the function will be canceled and the
display will return to the previous display.
Clock
Setting the Clock:
1. Press the
Setup
pad.
2. Select
CLOCK
using the Quickset pads.
3. Select
TIME
.
4. Enter the time using the number pads.
5. Press
Enter
pad.
6. Select
AM
or
PM
in 12 hour mode. (For 24 hour clock, see
page 14.)
7. To exit the Setup mode, press
Setup
pad.
If you need to back out of a function or option in the display,
press the
Back
pad. When your programming is complete,
press the
Enter
pad or wait four seconds and the function will
start automatically.
Up arrows indicate additional screens with additional options.
Press the
Quickset
pads next to the arrows to scroll through
the display.
I J K L M N O P Q
Cont.
8113P627-60
5/17/06, 10:54 AM
14