JENIX DS-103M, Руководство пользователя

Страница: 9 / 12

Touch-bar doesn’t move
check if the power is plugged in or connection is loose.
Turn off the power, pull down the touch-bar 5 ~ 10 cm downward, and turn on.
If the touch-bar in the top with no power but there is any sound, pull it down 5~10cm
downward and turn it on.
Touch-bar stopped
in the middle of
operation
If the touch-bar sopped in the middle (or bottom), turn if off and pull it up to
the top (or middle) of the rail, and then turn it on.
Height or weight
error
or inaccuracy
Try to measure with a standard rod or thing to find if it’s error or not.
Check if the bottom of the scale is completely fixed on the ground.
Try “Correction of weight error” in the page 6 .
Try “Zero setting” by yourself or request repairing service.
Others
If possible, please use this scale at one place. Frequent changes of location can
cause inaccuracy.
If you had to change location, please don’t forget to fix the scale completely on the ground.
Sometimes in case of problem in an adapter, it seems to work well but actually
causes malfunctioning.
Please do not pull or push the touch-bar forcibly by a hand while it is moving.
8
7. Trouble shooting
Touch-bar doesn’t move at all
Make sure a power cord connection is loose or unplugged.
Make sure you stepped on weighing board while display flicking.
Please check the power switch is working well.
Touch-bar stopped in the
middle of moving
Turn the power off and on again.
Make sure nothing is on the weighing board area.
Height or weight values measured
are different. (accuracy problem)
After turning off and on, try measuring 5~10 times more.
Adjust level again.
Reset height or weight according to the page 6 (correction).
Others
As it is sensitive system, please use in a fixed place, if possible.
This product is designed for free voltage (AC 100~220V).
Do not touch the power cord with wet hands.
(Electric shock can be caused)
As it is sensitive, please do not impact against the touch-bar.
Please use in a measurable range.
Please do not use when the scale is not yet ready (flickering)
Please be careful not to spill any liquid or something inflammable.
Plug out before cleaning and do not use water, benzene, thinner or alcohol onto
the product but only use dry duster.
CLEANING
NOTICE
POWER
Caution
To avoid users’ damages and to keep safe, please read this precautions.