JENIX DS-103M, Руководство пользователя

Страница: 7 / 12

6
< uP >
conversion
button
< dN >
when the measured weight value is
lower
than real weight
1. Push the setting button for
10 seconds
by using
a pin. Then, the touch-bar will go down and
stop at the level of the display.
2. Put a weight or an
object of which weight
you’ve already known.
(ex. 20kg)
3.
Push (or keep pushing) the
touching plate until exact weight
displayed.
4. Push the conversion button for
3 seconds
to finish correction.
This number is just for showing
changes and does not mean
setting value.
5. Correction of weight error
“push for 3 seconds”
when the measured weight is
higher
than real weight
1. Push the setting button for
10 seconds
.
2. Put a weight or an object of which weight you’ve already known. (ex. 20kg)
3. Push the setting button one more time to select “DOWN” from “UP”
4. Push (or keep pushing) the touching plate until exact weight displayed
This number is just for showing
changes and does not mean
setting value.
5. Push the conversion button for
3 seconds
to finish correction.
“push for 3 seconds”
20kg