JENIX DS-103M, Руководство пользователя

Страница: 5 / 12

FAT
BMI
4
after 1 min.
3. How to use
1. Plug in the DC power adapter.
2. Push the power switch
④
for 2seconds.
(push for 2 seconds to turn off also)
3. Check if BMI lamp is on. (whenever pushing
the conversion button, the lamp of BMI or FAT
will be alternately changed)
conversion
button
pin
4. Stepping on a weighing board (feet shaped).
and do not make any movement.
It is a start signal.
5. Measuring is completed when touch bar touches
your head and goes up.
6. Check the measured values.
The numbers will disappear 1 minute later.
weight
height
BMI index
⊙
If you move out while measuring, touch bar will be back to its original position.
⊙
Please try not to make any movement while you are on the weighing board.
⊙
Measured values will disappear 1 minute later.
⊙
To use it again, step on the weighing board when there is no flickering in the display.
Caution