JENIX DS-103M, Руководство пользователя

Страница: 4 / 12

3
Step 1
Step 2
Step 3
Step 4
2. Assembling procedures
Assembling
Put together rail
⑤
& base
⑧
,
then, screw 6pcs bolts tight
as in the drawing.
Lay down the body on its side
and join 2 pairs of connectors in the bottom of the base,
according to the same colors and shapes.
2 connectors from the rail and the rest 2 from the base.
Make the scale horizontal by using 5pcs of
rubber screws ⑩ . Please be sure if the bottom
of the scale contacted completely on the ground.
Balancing rubber screws
(5pcs)
Connect the power cord.
Correct pose
When stepping on a weighing board with
right pose, touch bar will be automatically
running down in 3 seconds.
Please pay attention not to make any movement
and not to lean against the rail while measuring.