3.2
水電安裝指引
Plumbing and electrical installation instructions
3.2.1 請確保單控式混合水龍頭安裝於穩固的牆
壁上，並接駁至自來水水管及接駁喉管。
Secure the mixer tap on the stable wall and attach it
to water supply pipe and the connection pipe.
3.2.2 請把接駁喉管接駁至熱水器。
Attach the connection pipe to the water heater;
3.2.3 請把花灑頭固定座安裝於適當的位置，再
連接接駁軟管至單控式混合水龍頭。
Fix the shower head holder to a suitable position and
then connect the shower head with the shower hose
and the mixer tap;
3.2.4 請安裝電源開關掣於浴室外之適當位置，
然後用標準電線把電源開關及熱水器的
電源接線座上相應的接線端連接好。
Power switch should be installed on an appropriate
position outside the bathroom, connect the power
switch with the corresponding wire terminal of the
power terminal block of the water heater with
standard wiring;
3.2.5 所有電線安裝必須根據發熱線的功率及
當地的電力條例。載流量必須合符熱水
器的額定功率，並預留有額外安全容量。
Depending on the power rating, installation must
comply with the local electric power regulation. The
current-carrying capacity must fulfill the water
heater’s power rating and have reserve for extra
capacity.
