2
GENERAL INTRODUCTION
Thank you for selecting the 3177 meter. The 3177 is a precision tool
that measures Conductivity, TDS, Salinity and Temperature. A
built-in microprocessor stores, calculates and compensates for all
parameters related to Conductivity, TDS, Salinity and Temperature
determinations.
This meter has a waterproof IP54 case. The mechanical keys are
highly reliable with tactile and audio feedback. It is powered by six
AAA-size alkaline batteries or with a UL / CE approved AC adapter
(OUTPUT: DC9V). The meter also displays a “BAT” message when
the batteries are in need of replacement. Re-calibration is not
required when power is restored.
The front of the meter has a large LCD that displays Conductivity,
TDS, Salinity and Temperature simultaneously along with user
prompts and mode indicators. The unit prompts the user through
calibration and measurement procedures.
The model 3177 micro-processor allows the user to easily
recalibrate the parameters for the probe. A few keystrokes will
adjust all the parameters for conductivity and will also give the user
the option to select four types (0.01, 0.1, 1.0, 10.0) of probe cell
constant for a better selection of available probes and applications.
And the user can input K value of the cell by keypad directly.
The system simultaneously displays temperature in
℃
along with
either Conductivity, TDS or Salinity. The user can switch back and
forth from all these displays by just pushing a single
“MODE”
key.
Other features include automatic conductivity ranging, automatic
temperature compensation and 50/60 Hz AC noise rejection. This
meter is user-friendly for laboratory application.
INITIAL INSPECTION
Carefully unpack the unit and accessories. Inspect for damages
made in shipment. If any damage is found, notify your
JENCO
representative immediately. All packing materials should be saved
until satisfactory operation is confirmed.
POWER INPUT
The model 3177 can be powered by an UL / CE approved 100 ~ 240
VAC adaptor as well as 6 “AAA” alkaline batteries. Check the label
on the AC adaptor supplied with the instrument to make sure that
the AC line voltage is correct. If the wrong AC adaptor is supplied,
notify your
JENCO
representative immediately.
