Jema Autolifte Euroline JA3000S-E, Инструкция по установке, эксплуатации и обслуживанию

Страница: 8 / 20

WE ARE HERE TO SURPRISE!
8
4. Installation
Move the whole unit to desired installation spot with a forklift.
(DO NOT MOVE THE LIFT, LIFTING ON THE SCISSORS SINCE THEY CAN BE DEFORMED!)
4.1 Installation instructions.
Step 1: Remove the packing, control box, oil hose and accessories. Read and understand this manual thoroughly before
the next step.
Step 2: Take the scissorlift of the pallet and pleace the control box where it should be placed -> But within the length of the
oil hose reach.
Step 3:
1. Drill holes in the floor to the Expansion bolts with a drillhammer. Be sure that the holes are drilled vertically into the
concrete floor.
2. After the holes are drilled (see picture 1), remove dirt and dust from drilling the holes. Make sure that the columns
are where drawn with chalk.
3. Expansion bolts knocked down, N.B. Do not tighten yet (see picture 2), bars soldered out of the enclosed sims.
(See picture 3)
4. Expansion bolts tightened with a torque wrench (80 Nm. / 16 ft -lbs) - After Expansion bolts been tightened, check
that the pillars are still plumb.