background image

                             

                                                                                      WE ARE HERE TO SURPRISE! 

 

         

 

1.

 IMPORTANT SAFETY INSTRUCTIONS.

 

1.1 Important notices. 

Jema  Autolifte  A/S  provides  the  user  with  a  1  year  warranty  on  the  lift,  if  there  is  something  wrong  with  the  lift  in  service 

conditions, we will repair or replace the product in accordance with the user's requirements.  Jema Autolifte  A/S assumes no 

responsibility for incorrect installation and operation, overload operation, improper concrete pad (not conforming to the manual), 

normal mechanical wear and inadequate maintenance. The warranty will be performed based on the type and serial number of 

the equipment. Therefore, those obtainable by the users to the manufacturer when this demand. 

This 

mid rise “service” scissorlift is specially designed to lift vehicles weighing less than its maximum lifting capacity. It is not 

allowed to use it for other purposes. If this is not respected, we will not assume liability to injury, accidental injury or damage to 

the lift.  Read  this manual  carefully before operating  lift.  This  allows  the person  or property  damage Without  our  professional 

advice. it is not permitted to make changes in mechanics or control unit. 

We recommend getting a proffessionel installer to mount and security approve lifts. Before starting

 
1.2 Qualified personnel. 

1.2.1   

Only these qualified staff, who have been properly trained, can operate the lift.   

1.2.2  

Electrical installation shall comply with local regulations and a qualified electrician must complete the connection.     

1.2.3   

People who are not trained are not allowed in the lifting area.   

 

1.3 Danger notices. 

1.3.1   

Do not install the lift on an asphalt surface. 

1.3.2   

Read and understand all safety warnings before operating the lift. 

1.3.3   

Outdoor, sandblasting, undercoating and other environments that differ from general immortal auto mechanic tasks. 

1.3.4   

Keep hands and feet away from any moving parts. Keep feet clear of the lift when lowering.   

1.3.5   

Only qualified people, who have been properly trained, can operate the lift.   

1.3.6  

Do not wear unfit clothes such as large clothes with flounces, tirs, etc, which could be caught by moving parts of the 

 

 

lift. 

1.3.7   

To prevent evitable incidents, surrounding areas of the lift must be clean and tidy. 

1.3.8   

The lift is simply designed to lift the entire vehicles, witch 

has it’s maximum weight within the lifting capacity. 

1.3.9   

Always insure the safety proberly managed before any attempt to work near or under the vehicle. 

1.3.10   

Make sure to place the lifting pads to the positions as suggested by vehicle manufactures and when gradually lift the 
vehicle to the desired height, operators should be certain that the vehicle will not slant, roll-over o

slide in lifting 

process. 

1.3.11   

Check at any time the parts on the lift to ensure the agility of moving parts and the performance of synchronization. 
Ensure regular maintenance and if anything abnormal occurs, stop using the lift immediately and contact our dealers 
for help. 

1.3.12   

Lower the lift to its lowest position and do remember to cut off the power source when service finishes. 

1.3.13   

Do not modify any parts of the lift 

without manufacturer’s advice. 

1.3.14   

If the lift is going to be unused for a long time, users are required to:   

 

 

 

 

 

 

 

 

 

 

Disconnect the power source and lubricate the moving parts with the correct lubrication.     

 

 

 

 

Note:    To protect the environment, any share disposed of according to current   

 

 

 

regulations. 

 

Содержание Euroline JA3000S-E





















Отзывы: