Jema Autolifte Euroline JA3000S-E, Инструкция по установке, эксплуатации и обслуживанию

Страница: 7 / 20

WE ARE HERE TO SURPRISE!
7
3. Before installation.
!!! We recommend getting a professional installer to mount the lift. !!!
3.1 Preparations before installation.
3.1.1 Tools and equipments needed.

Appropriate lifting equipment

Rotary Hammer Drill with 12 mm. drill bit.

Chalk and tape measure, magnetic plumb.

Sockets and a set of open wrenches, a set of inside hex wrenches ,cross and straight screw drivers.

Hammer 4 pounds, sharp nose pliers, oil funnel.
3.1.2 List for parts checking
Unfold the package and check if any parts missed. Checklist is within the packing - Do not hesitate to contact us in case any
parts missed, but if you do not contact us and insist installing upon the lack of some parts, Jema Autolifte A/S as well as our
dealers will not bear any responsibility for this and will charge for any parts subsequently demanded by the buyer.
3.1.3 Ground conditions.
The lift should be fixed on a smooth and solid concrete ground with its strength more than 3000psi, tolerance of flatness less
than 5 mm. and 120 to 150 mm. armed concrete thickness. In addition, newly built concrete ground must undergo more than
28days
’ hardening.
3.2
Precautions for installation.
3.2.1 Make sure the scissorlift stand correct and are vertical to the ground. No slanting.
3.2.2 All bolts, screws,nuts. Ect. should be firmly fastened.
3.2.3 Do not place any vehicle on the lift in the case of trial running.