Jema Autolifte DWC-9-E Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 38

Jema Autolifte DWC-9-E Скачать руководство пользователя страница 31

6.10 "Hidden weight" program - 3P

- find the location of the external (right) plane which switched to zenithal position ("12

o’clock")

- displayed pictogram:

- Next choose spots in which the weights are to be placed (resulting from splitting the

imbalance)  by  positioning  them  at  the  top  ("12  o’clock")  and  confirming  these  selections
by  pressing  ^  for  both  spots  on  opposite  sides  of  the  old  imbalance  position.  Newly
evaluated  weights  are  to  be  placed  in  the  pointed  to  spots  using  the  "head  of  the  adjuster"
(Pt-1 and Pt-2, respectively).

Proper protrusion of the adjuster is signaled by displaying the imbalance value in a

negative

First weight position

Second weight position

In this machine state, pressing the

key results in moving the adhesive weight

position to the bottom ("6 o’clock") - manual weight placement.

- Pictograms on the display^^

First weight's position

Second weight's position

-31

-

The "hidden weight" program breaks downa single imbalance point. It is only available for
weight placement modes (3),

(4)

and (5), (table 6.2). This function is used to break

down the value and position of imbalance correction into two separate values and points so

that the adhesive weights can be hidden behind the rim’s spoke thanks to which they are not
visible from outside (for a car wheel, modes 4 and 5) or split the imbalance so that it is
possible to omit the spoke, which is exactly in the weight placement point (for motorcycle

wheels, mode (

5

) )•

Properly executing the program:
- Press *

- displayed pictogram:

- pictogram on the display:

«
...
29
30
31
32
33
...
»

Содержание DWC-9-E







































Отзывы:

Нет отзывов