Jema Autolifte DWC-9-E, Руководство по эксплуатации

Страница: 20 / 38

Construction and equipment of the holder make it possible to mount wheels with different
rim shapes and different central hole diameters which is shown in figure
5.9. If using оде
of the centering cones, the wheel should be mounted from the outer side like in fig. 5.9(a)
and
5.9(д),
without using nut clamp 5 nor cone spring 4 (fig. 5.5). If due to the rim
mounted the cone is to be placed from the inner side, the nut clamp should be put onto the
clamp nut (fig.
5.4), spring with a matching cone slid to the handle in such manner that
bigger basis is facing the machine. Lastly, slide the wheel onto the cone and screw it firmly
to the holder using the clamp nut.
Fig. 5.9 Various methods of using the holder and its equipment.
When centering disks and cones are used for centering from the external edge of the rim, one
should take the clamp off the nut. In order to do so, pull the clamp along the axis so it goes
off the detent. One can gently dent it with a screwdriver. In order to put the clamp on, push
it in the nut's detent.
-
20
-