Operation
Before Use
This refrigerating appliance is not intended to be used as a built-in appliance.
Remove
all
of
the
packaging
,
including
the
foam
backing
at
the
bottom
of the
unit
and
the
tape
that
fixes
the
shelves
and
door
bins
inside
.
Place
the
refrigerator
to
a
proper
position
,
and
adjust
the
feet
to
level
.
It
is recommended
to
wipe
out
your
unit
with
a
warm
soapy
cloth
and
dry
it thoroughly
before
use
.
Place
the
refrigerator
and
adjust
to
level
,
clean
it
,
let
the
refrigerator
stand for
above
4
-
6
hours
,
and
then
power
the
unit
on
.
This
helps
make
sure
that the
oil
from
the
compressor
has
settled
properly
,
and
will
help
your
unit
run normally
.
Starting
Connect
the
power
cord
,
and
turn
on
the
power
switch
.
Upon
startup
for
the
first
time
,
the
screen
will
display
respective
set
temperature
values
(
the
temperature of the fridge section is set to 5°C, the temperature of the freezer is set to-18°C).
The default mode is energy saving upon startup: The screen displays for 20s and then goes
off. This mode to save energy and prolong the service life of LED lights.
The water supply system must be installed and connected by a professional technician.
Connect the refrigerator with the cold water pipe:
Min. pressure: 1.4bar;Max. pressure: 6.9bar;
Water supply connection
When using the function of ice maker, please make sure that the tap water pipe is connected normally
and the water valve is opened. Enough space shall be reserved for the faucet connecting water source.
After the refrigerator operates stably, the ice maker will make ice. Upon power-on for the first time, cold
water is available after 5 hours since the refrigerator operates normally, and ice cubes or crushed ice is
available after 12 hours.
WARNING: Connect to potable water supply only.
Control panel
Lock/Unlock
button
REF. temperature
adjustment button
FRZ. temperature
adjustment button
Ice maker
on/off
button
REF. TEMP
icon
FRZ. TEMP
icon
Ice
maker
OFF
icon
Reminder to change
THE
FILTER
icon
Super
fridge icon
Super
freezer icon
- 1
7
-