jeiko JKAL300PLUS, Руководство пользователя

Страница: 99 / 112

e44
ALARM & Procedures
ALARM & PROCEDURES
5. ALARM & PROCEDURES
5.1 Report and zone information on the LCD display
The arm (TOTAL & PARTIAL) operation and the disarm of the
control panel controls only and exclusively on the burglar,
delayed and perimeter zones. All other types of zones are 24
hours activated.
5.2 Report to Supervisory Institute CMS
The panels adopt Contact ID for the communication protocol
to send the alarming information to the center. If the panel
receive the acknowledgement from center, then a successful
alarm, if not, the panel will alarm repeatly .Alarm information
can be displayed and resolved by the software of center
computer.
When the control panel receives an alarm signal from a delayed
zone, generates two tones sound "dee dee", and starts the
countdown of the delay time (indicated with the same tonebut
higher frequency). If thecontrol panel wiil not be turn off within
the preset time , the dialer starts routine calls to phone
numbers programmed, if the alarm signal received from one of
the areas types (intrusion, perimeter, emergency, fire,gas) the
activation of the siren and dialer are immediate. When the user
answer to the call made by the control panel hears the alarm
message recorded can and the he can operate the control panel
following the voice guide.
AlARM at Mr Taylor ’s home ,
pleaseinput your password.
1
2
3
4
X X X X
enter the user password
0
#
System arm, please press1
system disarm, please press2
inquiry the system status
please press 3
listen to the spot
hang up , please press 0
5.3 Alert report from control panel to user telephone