jeiko JKAL300PLUS, Руководство пользователя

Страница: 60 / 112

All this combined with our alarm system will lead to adequate
protection and a deterrent to any attacker.
To operate the system must have its own remote control included and
already enrolled in the control panel, you can enroll up to 8 remote
controls: as mentioned in the user manual, or you can operate the
alarm system via the its keypad or the auxiliary keypad (optional). We
recommend that you take care of your remote control and especially
you do not to lose it.
Security.
While using the tools for the installation of alarm systems or sensors,
follow the advice of manufacturers, (use security tools, such as, work
gloves, safety glasses if any) before using a drill Electric or battery,
make sure that the tips for the forum are of the appropriate type
(concrete or wood), especially checked before drilling confirmed that
the location you do not pass electrical wires or water pipes. When
using ladders, make sure the correct angle of opening, and above all
that the ground plane is correct and the scale is staggering.
During the installation of the siren (optional), take care not to cause
false alarms close to your ear not to cause any damage to it.
The control unit with built-in siren JKAL3BR receives radio signals from
the detectors, from remote controls and it plans,the activation of its
built-in siren and warning devices (sirens external dialer) in case of
intrusion alarm, emergency.
The control unit JKAL3BR confirms the good reception of the
commands sent from the remote control or keyboard by the LCD and
warning led on / off.
Built-in siren of the control unit JKAL3BR confuses and attack the
intruder .
INTRODUCTION AND OVERVIEW
e05
INTRODUCTION