Jegs BLUEARC-200MSTI, Руководство пользователя

Страница: 4 / 30

3
∙ The switching of function modes while the welding operation is performed, may
damage the machine.
∙ Disconnect the electrode ‐ holder cable with the machine, before turning
machine on.
∙ A safety switch is necessary to prevent the machine from electrical leakage.
∙ Welding tools used should be of high quality.
∙ Operators should be qualified.
Electric shock: It could be fatal!
∙ Connect the earth cable according to standard regulation.
∙ Avoid all contact with live electrical parts of the welding circuit, electrodes and
wires with bare hands. It is necessary for the operator to wear dry welding
gloves while he/she performs the welding task.
∙ The operator should keep the working piece insulated from himself/herself.
Smoke and gas generated while welding or cutting is harmful to people’s
health.
∙ Avoid breathing the smoke and gas generated while welding or cutting.
∙ Keep the working area well ventilated.
Arc rays: harmful to people’s eyes and skin.
∙ Wear welding helmet, anti ‐ radiation glass and work clothes while the welding
operation is performed.
∙ Measures also should be taken to protect people in or near the working area.
.
Fire hazard
∙ The welding spatter may cause fire, thus remove flammable material away from
the working place.
∙ Have a fire extinguisher nearby, and have a trained person ready to use it.
Noise: possibly harmful to peoples’ hearing.
∙ Noise is generated while welding/cutting, wear approved ear protection if noise
level is high.
Machine fault:
∙ Consult this instruction manual.
∙ Contact your local dealer or supplier for further advice.