Jegs BLUEARC-200MSTI, Руководство пользователя

Страница: 15 / 30

14
5.1.8 Lift TIG operation
Note ‐ TIG operation requires an argon gas supply, TIG torch, consumables, and gas regulator. These accessories are not
included standard with the MIG ‐ GS/GD; contact your supplier for further details.
5.1.8.1
Connect Earth Lead Quick Connector (23) to the positive (+) output welding terminal (6).
5.1.8.2
Connect Earth Clamp (22) to the work piece. Contact with workpiece must be strong contact with clean, bare
metal, with no corrosion, paint, or scale at the contact point.
5.1.8.3 Connect the TIG torch power lead to the negative ( ‐ ) welding output terminal (7).
1.8.4 Connect the gas supply to the TIG torch.
5.1.8.5 Turn the machine on at the Mains Power Switch (10).
5.1.8.6 Press the Left button (2) to mode section and select the mode by Left knob (1), and press the Left knob (1) to
confirm the LIFT TIG selection.
The screen will show the preset LIFT TIG welding current. This can be adjusted by rotating the Right Knob (3)
5.1.8.7 When welding the display will change to show actual welding volts and amperage.