h
9
MAINTAINING THE CUTTING COMPONENTS
THE BLADES ON THE CUTTER GRINDER ARE VERY SHARP. ALWAYS TAKE
GREAT CARE WHEN WORKING WITH THEM TO AVOID INJURY.
The cutter blades, the head inserts and their alignment are the most important
things in the continuing high performance of the
h
Cutter Grinder
Model
CG02
.
The maintenance of the cutting faces of the cutter blades in particular is
of critical importance. This section will outline the procedure to be followed to
gain the best duty and life from the blades and inserts.
It is extremely important that the angles shown for the cutter blades are main-
tained. Only a properly qualified tradesperson should be assigned to perform
this work.
The diagram below shows the technical specifications for angles and dimensions
of the cutter blades. Note that the lock screw and nylon pad in the top of the
blade are only to provide tension for the adjusting screw and should not nor-
mally need to be touched.
The cutter blades and head inserts on the
h
Cutter Grinder
Model CG02
are
made from high quality precision ground and hardened tool steel.
To maintain the best performance, it is only necessary to grind the forward cut-
ting face of the cutter blades as shown in the diagrams below. To assist in keep-
ing the precise angles and dimensions, every
h
Cutter Grinder
is shipped
with a precision laser cut gauge plate (
Part No E565
).
Figure 9. Cutter Blade Specifications
