Jeep WRANGLER 2021 Скачать руководство пользователя страница 152

Страница: 152 / 464

150

STARTING AND OPERATING

shift from NEUTRAL into DRIVE or REVERSE

when the vehicle is stopped or moving at low

speeds. Select the DRIVE range for normal

driving.

NOTE:

In the event of a mismatch between the gear

selector position and the actual transmission

gear (for example, driver selects PARK while

driving), the position indicator will blink continu

ously until the selector is returned to the proper

position, or the requested shift can be

completed.
The electronically-controlled transmission

adapts its shift schedule based on driver inputs,

along with environmental and road conditions.

The transmission electronics are

self-calibrating; therefore, the first few shifts on

a new vehicle may be somewhat abrupt. This is

a normal condition, and precision shifts will

develop within a few hundred miles

(kilometers).
Only shift from DRIVE to PARK or REVERSE

when the accelerator pedal is released and the

vehicle is stopped. Be sure to keep your foot on

the brake pedal when shifting between these

gears.

The transmission gear selector provides PARK,

REVERSE, NEUTRAL, DRIVE and MANUAL

(AutoStick) shift positions. Manual shifts can be

made using the AutoStick shift control. Toggling

the gear selector forward (-) or rearward (+)

while in the MANUAL (AutoStick) position

(beside the DRIVE position) will manually select

the transmission gear, and will display the

current gear in the instrument cluster

page 153.

Transmission Gear Selector

NOTE:

If the gear selector cannot be moved to the

PARK, REVERSE, or NEUTRAL position (when

pushed forward), it is probably in the

AutoStick (+/-) position (beside the DRIVE posi

tion). In AutoStick mode, the transmission gear

(1, 2, 3, etc.) is displayed in the instrument

cluster. Move the gear selector to the right (into

the DRIVE [D] position) for access to PARK,

REVERSE, and NEUTRAL.

Gear Ranges

Do not press the accelerator pedal when

shifting out of PARK or NEUTRAL.

NOTE:

After selecting any gear range, wait a moment

to allow the selected gear to engage before

accelerating. This is especially important when

the engine is cold.
PARK (P)
This range supplements the parking brake by

locking the transmission. The engine can be

started in this range. Never attempt to use

PARK while the vehicle is in motion. Apply the

parking brake when exiting the vehicle in this

range.
When parking on a hill, apply the parking brake

before shifting the transmission to PARK. As an

added precaution, turn the front wheels toward

the curb on a downhill grade and away from the

curb on an uphill grade.

21_JL_OM_EN_USC_t.book Page 150

Содержание WRANGLER 2021

















































































































































































































































































































































































































































































Результаты поиска

Содержание WRANGLER 2021

Отзывы:

Jeep WRANGLER 2021, Руководство пользователя, Страница: 152 / 464

Результаты поиска

Содержание WRANGLER 2021

Отзывы: