Jeep GRAND CHEROKEE 4xe 2023, Руководство пользователя

Страница: 159 / 440

STARTING AND OPERATING 157
To to adjust the distance setting, push the
Distance Setting Button and release. Each time the
button is pushed, the distance setting decreases
by one bar (shorter). Once the shortest setting is
reached, if the button is pushed again it will be set
to the longest setting available.
If there is no vehicle ahead, the vehicle will
maintain the set speed. If a slower moving vehicle
is detected in the same lane, the instrument
cluster display will show the ACC Set With Target
Detected Indicator Light, and the system will adjust
the vehicle speed automatically to maintain the
distance setting, regardless of the set speed.
The vehicle will then maintain the set distance
until:

The vehicle ahead accelerates to a speed above
the set speed.

The vehicle ahead moves out of your lane or
view of the sensor.

The distance setting is changed.

The system disengages
Ú
page 154.
The maximum braking applied by ACC is limited;
however, the driver can always apply the brakes
manually, if necessary.
NOTE:
The brake lights will illuminate whenever the
ACC system applies the brakes.
A Proximity Warning will alert the driver if ACC
predicts that its maximum braking level is not
sufficient to maintain the set distance. If this occurs,
a visual alert “BRAKE!” will flash in the instrument
cluster display and a chime will sound while ACC
continues to apply its maximum braking capacity.
NOTE:
The “BRAKE!” screen in the instrument cluster
display is a warning for the driver to take action
and does not necessarily mean that the Forward
Collision Warning system is applying the brakes
autonomously.
Overtake Aid
When driving with Adaptive Cruise Control (ACC)
engaged and following a vehicle, the system will
provide an additional acceleration up to the ACC
set speed to assist in passing the vehicle. In
locations with left hand drive traffic, an additional
acceleration is triggered when the driver utilizes
the left turn signal and will only be active when
passing on the left hand side. In locations with right
hand drive traffic, an additional acceleration is
triggered when the driver utilizes the right turn
signal and will only be active when passing on the
right hand side.
NOTE:
When the vehicle transitions from a location with
left hand drive traffic to a location with right hand
drive traffic or vice versa, the ACC system will auto-
matically detect the direction of traffic.
ACC Operation At Stop
If the ACC system brings your vehicle to a standstill
while following a vehicle ahead, your vehicle will
resume motion, without any driver interaction, if
the vehicle ahead starts moving within two
seconds of your vehicle coming to a standstill.
If the vehicle in front does not start moving within
two seconds of your vehicle coming to a standstill,
the driver will either have to push the RES (resume)
button, or apply the accelerator pedal to reengage
the ACC to the existing set speed.
NOTE:

If your vehicle is at a standstill for longer than
two seconds, the system will hold brake pres-
sure for up to 10 minutes. If no driver action is
taken after the 10 minutes, the Electric Park
Brake will be applied and the ACC system will
cancel.

While ACC is holding your vehicle at a standstill or
the vehicle is traveling below 3 mph (5 km/h),
and the driver seat belt is unbuckled or the driver
door is opened, the Electric Park Brake will be
applied and the ACC system will cancel.
4
23_WL_H_OM_EN_EE_t.book Page 157