Jeep Gladiator 2020, Руководство пользователя

Страница: 22 / 303

GETTING TO KNOW YOUR VEHICLE
20
4. Pull up on the red locking tab to unlock
the wiring harness.
Closed Wiring Harness
5. Push and hold down the black security
tab under the wiring harness, and lift the
harness lever into the open position.
Open Wiring Harness
6. With the wiring harness open, pull down -
ward on the wiring connector to unplug.
Unhook the wire harness strap from the
hook on the bodyside door opening. Store
the wiring connector in the lower door
basket of the door.
7. With the door in the open position,
remove the check bolt from the door
check attachment on the bodyside (using
a #T40 Torx head driver).
Door Check
8. With the door open, lift the door with the
help of another person, to clear the hinge
pins from their hinges and remove the
door.
To reinstall the door(s), perform the previous
steps in the reverse order.
NOTE:
The upper hinge has a longer pin, which can
be used to assist in guiding the door into
place when reinstalling. When reinstalling
the door check arm attachment bolt, bolt
torque should be between 11.76 ft·lb /
16 N·m and 27.9 ft·lb / 38 N·m.
1 — Locking Tab
2 — Wiring Harness Lever
1 — Wiring Harness Lever
2 — Wiring Connector