Jeep Gladiator 2020, Руководство пользователя

Страница: 164 / 303

STARTING AND OPERATING
162
Front View Camera
NOTE:
The system will stay active while in 4L
(Four-Wheel Drive Low Range).
The TrailCam System has programmable
settings that may be selected through the
Uconnect System. Refer to “Uconnect
Settings” in “Multimedia” in the Owner’s
Manual for further information.
Manual Activation Of The TrailCam
TrailCam view can be activated via the below
methods:

Press the “FWD Camera” button on the
controls screen.

Press the “FWD Camera” button on the
app menu.

Press the “FWD Camera” button on the
Off Road Pages.

Auto Launch Off Road+ Setting is selected
under camera settings and press the “Off
Road+” button.
The TrailCam view can also be activated via
“FWD Camera” button on the Backup
Camera view. The Backup Camera view can
also be activated via the “Backup Camera”
button on the TrailCam view.
When the vehicle is shifted out of REVERSE
(with Camera Delay turned off) and TrailCam
view is active, the TrailCam mode is exited
and the previous screen appears again.
When the vehicle is shifted out of REVERSE
(with Camera Delay turned on) and the
TrailCam view is active, the TrailCam image
will be displayed for up to 10 seconds unless
the vehicle speed exceeds 8 mph (13 km/h),
the transmission is shifted into PARK, the
ignition is placed in the OFF position, or the
touchscreen button “X” to disable display of
the TrailCam view is pressed.
Whenever the TrailCam image is activated
through the Manual Activation Methods, and
the vehicle speed is greater than or equal to
8 mph (13 km/h), a display timer for the
image is initiated. The image will continue to
be displayed until the display timer exceeds
10 seconds.
NOTE:

If the vehicle speed remains below 8 mph
(13 km/h), the TrailCam image will be
displayed continuously until deactivated
via the touchscreen button “X”, the trans
-
mission is shifted into PARK, or the igni -
tion is placed in the OFF position.

The touchscreen button “X” to disable the
display of the camera image is made avail -
able ONLY when the vehicle is not in
reverse.

The TrailCam view will stay active regard -
less of the vehicle speed and time while in
4L (Four-Wheel Drive Low Range)
Cleaning The TrailCam
Press the “Clean Camera” soft button
located on the TrailCam view to wash the
TrailCam.

The camera can be washed up to 20 seconds
at a time.

The “Clean Camera” system is not avail -
able when windshield washing is in
process.