Jeep Gladiator 2020, Руководство пользователя

Страница: 14 / 303

GETTING TO KNOW YOUR VEHICLE
12
(Continued)
NOTE:
In case the ignition switch does not change
with the push of the START/STOP ignition
button, the key fob may have a low or
depleted battery. In this situation, a back up
method can be used to operate the ignition
switch. Put the nose side of the key fob (side
with the mechanical flip key) against the
START/STOP ignition button and push to
operate the ignition switch.
START/STOP Ignition Button
The push button ignition can be placed in
the following modes:
OFF

The engine is stopped.

Some electrical devices (e.g. Central
locking, alarm, etc.) are available.
ACC

Engine is not started.

Some electrical devices are available.
RUN

Driving position.

All electrical devices are available.
START

The engine will start.
NOTE:
Refer to "Starting The Engine" in "Starting
And Operating" in the Owner’s Manual for
further information.
WARNING!

When exiting the vehicle, always remove
the key fob from the vehicle and lock
your vehicle.

Never leave children alone in a vehicle,
or with access to an unlocked vehicle.

Allowing children to be in a vehicle unat -
tended is dangerous for a number of
reasons. A child or others could be seri -
ously or fatally injured. Children should
be warned not to touch the parking
brake, brake pedal or the gear selector.

Do not leave the key fob in or near the
vehicle, or in a location accessible to
children, and do not leave the ignition of
a vehicle equipped with Keyless
Enter-N-Go in the ON/RUN mode. A
child could operate power windows,
other controls, or move the vehicle.

Do not leave children or animals inside
parked vehicles in hot weather. Interior
heat build-up may cause serious injury or
death.
CAUTION!
An unlocked vehicle is an invitation for
thieves. Always remove key fob from the
vehicle and lock all doors when leaving the
vehicle unattended.
WARNING! (Continued)