
125
8. If the child restraint has a top tether
strap and the seating position has a top
tether anchorage, connect the tether
strap to the anchorage and tighten the
tether strap. See the section “Installing
Child Restraints Using the Top Tether
Anchorage” for directions to attach a
tether anchor.
9. Test that the child restraint is installed
tightly by pulling back and forth on the
child seat at the belt path. It should not
move more than 1
inch (25.4
mm) in any
direction.
Any seat belt system will loosen with time, so
check the belt occasionally, and pull it tight
if necessary.
Installing Child Restraints Using The Top
Tether Anchorage
The Top Tether anchorages are located
behind each rear seating position. To attach
the tether strap of the child restraint:
1. Place the child restraint on the seat and
adjust the tether strap so that it will
reach over the seat back, under the head
restraint and to the tether anchor directly
behind the seat.
2. Release the seat back by pulling the
release strap located on the top of the
seat back to provide room to reach the
tether anchor.
Tether Strap Mounting
3. Route the tether strap to provide the
most direct path between the anchorage
and the child seat. The tether strap
should go between the head restraint
posts underneath the head restraint. You
WARNING!
Do not attach a tether strap for a
rear-facing car seat to any location in front
of the car seat, including the seat frame or
a tether anchorage. Only attach the tether
strap of a rear-facing car seat to the tether
anchorage that is approved for that seating
position, located behind the top of the
vehicle seat. See the section “Lower
Anchors and Tethers for CHildren (LATCH)
Restraint System” for the location of
approved tether anchorages in your
vehicle.
Содержание Gladiator 2020
Страница 1: ...2020 GLADIATOR USER GUIDE ALL NEW...