SERVICING AND MAINTENANCE
147
5. Replace the bulb as necessary by turning
and removing the bulb housing.
Reverse Side of Tail Lamp
6. Insert the new bulb, making sure it is
properly locked.
7. Reposition the rear body side lamp
assembly on the vehicle.
8. Reconnect the electrical connector.
9. Reinstall the body side lamp making sure to
align the ball studs.
NOTE:
Ensure uniform gap between body and lamp
assembly. Lamp touching the body can create
excessive stress in lens surface and lamp lens
can develop a crack in the future.
Body Side Tail Lamp
10. Install fasteners and tighten body side lamp
assembly.
11. Finally close the tailgate.
Rear Fog Lamps
1. Using a suitable non-marking tool, carefully
pry at the top inboard edge of the fog lamp
to disengage the snap features.
2. Disconnect the electrical connector by
pushing down on locking mechanism.
3. Remove socket by turning it counter
-
clockwise and remove from lamp.
4. Pull the bulb to remove it from the socket.
5. Replace bulb and twist the socket clockwise
to reinstall.
6. Reconnect the electrical connector.
7. Reinstall the lamp by snapping in the
locking tab features on the left and right
edges of the fog lamp.
1 — Direction Indicator Bulb / Stop Lamp Bulb
2 — Electrical Connector
3 — Ball Studs
1 — Rear Body Side Tail Lamp
2 — Ball Stud
21_M6_EIG_EN_IN_t.book Page 147
Содержание Compass
Страница 1: ...ESSENTIAL INFORMATION GUIDE...
Страница 26: ...GETTING TO KNOW YOUR INSTRUMENT PANEL 25 Midline Instrument Cluster 21_M6_EIG_EN_IN_t book Page 25...
Страница 32: ...GETTING TO KNOW YOUR INSTRUMENT PANEL 31 Midline Diesel Instrument Cluster 21_M6_EIG_EN_IN_t book Page 31...
Страница 189: ......