![background image](http://html1.mh-extra.com/html/jeep/compass/compass_information-manual_4065415101.webp)
100
IN CASE OF EMERGENCY
J
UMP
S
TARTING
P
ROCEDURE
Connecting The Jumper Cables
1. Connect the positive (+) end of the jumper
cable to the positive (+) post of the
discharged vehicle.
2. Connect the opposite end of the positive (+)
jumper cable to the positive (+) post of the
booster battery.
3. Connect the negative (-) end of the jumper
cable to the negative (-) post of the booster
battery.
4. Connect the opposite end of the negative (-)
jumper cable to a good engine ground
(exposed metal part of the discharged
vehicle’s engine) away from the battery and
the fuel injection system.
Suitable Engine Ground (Example Engine Shown)
5. Start the engine in the vehicle that has the
booster battery, let the engine idle for a few
minutes, and then start the engine in the
vehicle with the discharged battery.
6. Once the engine is started, remove the
jumper cables in the reverse sequence.
WARNING!
Failure to follow this jump starting procedure
could result in personal injury or property
damage due to battery explosion.
CAUTION!
Failure to follow these procedures could
result in damage to the charging system of
the booster vehicle or the discharged vehicle.
WARNING!
Do not connect the jumper cable to the
negative (-) post of the discharged battery.
The resulting electrical spark could cause the
battery to explode and could result in
personal injury. Only use the specific ground
point, do not use any other exposed metal
parts.
21_M6_EIG_EN_IN_t.book Page 100
Содержание Compass
Страница 1: ...ESSENTIAL INFORMATION GUIDE...
Страница 26: ...GETTING TO KNOW YOUR INSTRUMENT PANEL 25 Midline Instrument Cluster 21_M6_EIG_EN_IN_t book Page 25...
Страница 32: ...GETTING TO KNOW YOUR INSTRUMENT PANEL 31 Midline Diesel Instrument Cluster 21_M6_EIG_EN_IN_t book Page 31...
Страница 189: ......