Jeep compass 2017, Руководство пользователя

Страница: 89 / 332

Blind Spot Alert Off
When the BSM system is turned off, there will
be no visual or audible alerts from either the
BSM or RCP systems.
NOTE:
The BSM system will store the current oper-
ating mode when the vehicle is shut off. Each
time the vehicle is started the previously
stored mode will be recalled and used.
Forward Collision Warning (FCW)
The Forward Collision Warning (FCW) system
with mitigation provides the driver with au-
dible warnings, visual warnings (within the
instrument cluster display), and may apply a
brake jerk to warn the driver when it detects a
potential frontal collision. The warnings and
limited braking are intended to provide the
driver with enough time to react, avoid or
mitigate the potential collision.
NOTE:
FCW monitors the information from the for-
ward looking sensors as well as the Electronic
Brake Controller (EBC), to calculate the prob-
ability of a forward collision. When the sys-
tem determines that a forward collision is
probable, the driver will be provided with
audible and visual warnings and may provide
a brake jerk warning.
Turning FCW On Or Off
The forward collision menu setting is located
in the Uconnect settings.
• To turn the FCW system off, press the
forward collision button once to turn the
system off.
• To turn the FCW system back on, press the
forward collision button again to turn the
system on.
NOTE:
• The default status of FCW is “on”, this
allows the system to warn you of a possible
collision with the vehicle in front of you.
• Changing the FCW status to “off” prevents
the system from warning you of a possible
collision with the vehicle in front of you.
If FCW is set to “off”, “FCW OFF” will
be displayed in the instrument cluster
display.
Changing FCW Status
The FCW feature has three settings and can
be changed within the Uconnect System
Screen:
• Far
• Medium
• Near
Far
The far setting provides warnings for poten-
tial collisions more distant in front of the
vehicle, allowing the driver to have the most
reaction time to avoid a collision.
More cautious drivers that do not mind fre-
quent warnings may prefer this setting.
NOTE:
This setting gives you the most reaction time.
Medium
The default status of FCW is the “Medium”
setting and the Active Braking is in the “on”
setting. This allows the system to warn the
driver of a possible collision with the vehicle
in front using audible/visual warnings and it
applies autonomous braking.
87