Jeep compass 2017, Руководство пользователя

Страница: 66 / 332

Right Arrow Button
• Push and release the right arrow button to
access the information screens or sub-
menu screens of a main menu item.
Left Arrow Button
• Push and release the left arrow button to
access the information screens or sub-
menu screens of a main menu item.
OK Button
• Push the OK button to access/select the
information screens or submenu screens
of a main menu item. Push and hold the
OK button for one second to reset
displayed/selected features that can be
reset.
Oil Change Reset
• Your vehicle is equipped with an engine oil
change indicator system. The “Oil Change
Due” message will display in the instru-
ment cluster display for five seconds after
a single chime has sounded, to indicate
the next scheduled oil change interval.
The engine oil change indicator system is
duty cycle based, which means the engine
oil change interval may fluctuate, depen-
dent upon your personal driving style.
• Unless reset, this message will continue to
display each time the ignition is cycled to
the ON/RUN position.
• To reset the oil change indicator after
performing the scheduled maintenance,
refer to the following procedure.
Models Equipped With Keyless Go — Ignition
1. Without pushing the brake pedal, push
the ENGINE START/STOP button and
cycle the ignition to the ON/RUN position
(do not start the engine.)
2. Fully push the accelerator pedal, slowly,
three times within ten seconds.
3. Cycle the ignition to the OFF/LOCK
position.
NOTE:
If the indicator message illuminates when
you start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.
TRIP COMPUTER
Push and release the up or down arrow button
until the Trip A or Trip B icon is highlighted in
the instrument cluster display (Toggle left or
right to select Trip A or Trip B). Push and
release the OK button to display the Trip
information.
WARNING/INDICATOR
LIGHTS AND MESSAGES
The warning/indicator light switches on in the
instrument panel together with a dedicated
message and/or acoustic signal when appli-
cable. These indications are indicative and
precautionary and as such must not be con-
sidered as exhaustive and/or alternative to
the information contained in the Owner
Manual, which you are advised to read care-
fully in all cases. Always refer to the informa-
tion in this chapter in the event of a failure
indication.
GETTING
TO
KNOW
YOUR
INSTRUMENT
P
ANEL
64