Jeep 2015 Wrangler, Руководство по эксплуатации

Страница: 75 / 750

•
The Uconnect® Phone does slightly lower
your chances of successfully making a
phone call as to that for the mobile phone
directly.
WARNING!
To use your Uconnect® Phone System in
an emergency, your mobile phone must be:
•
turned on,
•
paired to the Uconnect® System,
•
and have network coverage.
Breakdown Service — If Equipped
If you need Breakdown service:
•
Push the button to begin.
•
After the “Ready” prompt and the following
beep, say “Breakdown service.”
NOTE:
The Breakdown service number has to be
setup before using. To setup, push the
button and say “Setup, Breakdown Ser-
vice” and follow prompts.
Paging
To learn how to page, refer to “Working with
Automated Systems.” Paging works properly
except for pagers of certain companies, which
time out a little too soon to work properly with
the Uconnect® Phone.
Voice Mail Calling
To learn how to access your voice mail, refer to
“Working with Automated Systems.”
Working With Automated Systems
This method is used in instances where one
generally has to press numbers on the mobile
phone keypad while navigating through an au-
tomated telephone system.
You can use your Uconnect® Phone to access a
voice mail system or an automated service, such
as a paging service or automated customer
service. Some services require immediate re-
sponse selection. In some instances, that may be
too quick for use of the Uconnect® Phone.
When calling a number with your Uconnect®
Phone that normally requires you to enter in a
touch-tone sequence on your mobile phone
keypad, you can push the
button and say
the sequence you wish to enter followed by the
word “Send.” For example, if required to enter
your PIN followed with a pound, (3 7 4 6 #), you
can push the
button and say, “3 7 4 6 #
Send.” Saying a number, or sequence of num-
bers, followed by “Send,” is also to be used for
navigating through an automated customer ser-
vice center menu structure, and to leave a
number on a pager.
You can also send stored Uconnect® Phone-
book entries as tones for fast and easy access
to voice mail and pager entries. To use this
feature, dial the number you wish to call and
then push the
button and say “Send.” The
system will prompt you to enter the name or
number and say the name of the phonebook
entry you wish to send. The Uconnect® Phone
will then send the corresponding phone number
associated with the phonebook entry, as tones
over the phone.
NOTE:
•
You may not hear all of the tones due to
mobile phone network configurations;
this is normal.
72