Jeep 2011 grand cherokee Скачать руководство пользователя страница 613 | Manualshive

Страница: 613 / 724

Jeep 2011 grand cherokee Скачать руководство пользователя страница 613

WARNING!

•

Take care to avoid the radiator cooling fan when-
ever the hood is raised. It can start anytime the
ignition switch is ON. You can be injured by
moving fan blades.

•

Remove any metal jewelry such as watch bands or
bracelets that might make an inadvertent electrical
contact. You could be seriously injured.

•

Batteries contain sulfuric acid that can burn your
skin or eyes and generate hydrogen gas which is
flammable and explosive. Keep open flames or
sparks away from the battery.

1. Set the parking brake, shift the automatic transmission

into PARK and turn the ignition to LOCK.

2. Turn off the heater, radio, and all unnecessary electri-

cal accessories.

3. Remove the protective cover over the remote posi-

tive

(+)

battery post. Pull upward on the cover to

remove it.

4. If using another vehicle to jump-start the battery, park

the vehicle within the jumper cables reach, set the
parking brake and make sure the ignition is OFF.

WARNING!

Do not allow vehicles to touch each other as this
could establish a ground connection and personal
injury could result.

6

WHAT TO DO IN EMERGENCIES

611

«
...
611
612
613
614
615
...
»

Содержание 2011 grand cherokee





















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов