Jeep 2011 grand cherokee Скачать руководство пользователя страница 414 | Manualshive

Страница: 414 / 724

Jeep 2011 grand cherokee Скачать руководство пользователя страница 414

Replacing The Headphone Batteries

Each set of headphones requires two AAA batteries for
operation. To replace the batteries:

•

Locate the battery compartment on the left ear cup of
the headphones, and then slide the battery cover
downward.

•

Replace the batteries, making sure to orient them
according to the polarity diagram shown.

•

Replace the battery compartment cover.

Unwired

姞

Stereo Headphone Lifetime Limited

Warranty

Who Does This Warranty Cover?

This warranty covers

the initial user or purchaser (

⬙

you

⬙

or

⬙

your

⬙

) of this particu-

lar Unwired Technology LLC (

⬙

Unwired

⬙

) wireless head-

phone (

⬙

Product

⬙

). The warranty is not transferable.

How Long Does the Coverage Last?

This warranty lasts

as long as you own the Product.

What Does This Warranty Cover?

Except as specified

below, this warranty covers any Product that in normal
use is defective in workmanship or materials.

What Does This Warranty Not Cover?

This warranty

does not cover any damage or defect that results from
misuse, abuse or modification of the Product other than
by Unwired. Foam earpieces, which will wear over time
through normal use, are specifically not covered (replace-
ment foam is available for a nominal charge). UNWIRED
TECHNOLOGY IS NOT LIABLE FOR ANY INJURIES
OR DAMAGES TO PERSONS OR PROPERTY RESULT-
ING FROM THE USE OF, OR ANY FAILURE OR DE-
FECT IN, THE PRODUCT, NOR IS UNWIRED LIABLE
FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT,
INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, PU-
NITIVE OR OTHER DAMAGES OF ANY KIND OR
NATURE WHATSOEVER. Some states and jurisdictions

412

UNDERSTANDING YOUR INSTRUMENT PANEL

«
...
412
413
414
415
416
...
»

Содержание 2011 grand cherokee





















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов