Jeep 2011 grand cherokee Скачать руководство пользователя страница 547 | Manualshive

Страница: 547 / 724

Jeep 2011 grand cherokee Скачать руководство пользователя страница 547

TIRE PRESSURE MONITOR SYSTEM (TPMS)

The Tire Pressure Monitoring System (TPMS) will warn
the driver of a low tire pressure based on the vehicle
recommended cold tire placard pressure.

The tire pressure will vary with temperature by about
1 psi (7 kPa) for every 12°F (6.5°C). This means that when
the outside temperature decreases, the tire pressure will
decrease. Tire pressure should always be set based on
cold inflation tire pressure. This is defined as the tire
pressure after the vehicle has not been driven for at least
three hours, or driven less than 1 mile (1.6 km) after a
three-hour period.

Refer to “Tires – General Informa-

tion” in “Starting and Operating” for information on
how to properly inflate the vehicle’s tires.

The tire

pressure will also increase as the vehicle is driven - this is
normal and there should be no adjustment for this
increased pressure.

The TPMS will warn the driver of a low tire pressure if
the tire pressure falls below the low pressure warning
threshold for any reason, including low temperature
effects, or natural pressure loss through the tire.

Tire Rotation

5

STARTING AND OPERATING

545

«
...
545
546
547
548
549
...
»

Содержание 2011 grand cherokee





















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов