Jeep 2011 grand cherokee Скачать руководство пользователя страница 195

Страница: 195 / 724

WARNING!

(Continued)

collision. Always make sure the outboard head re-
straints are in their upright positions when the seat is
to be occupied.

NOTE:

For proper routing of a Child Seat Tether refer to

“Occupant Restraints” in “Things to Know Before Start-
ing Your Vehicle” for further information.

60/40 Split Rear Seat

To Lower Rear Seat

Either side of the rear seat can be lowered to allow for
extended cargo space and still maintain some rear seating
room.

NOTE:

Be sure that the front seats are fully upright and

positioned forward. This will allow the rear seatback to
fold down easily.

1. Pull upward on the release lever to release the seat.

NOTE:

•

Do not fold the 60% rear seat down with the left
outboard or rear center seat belt buckled.

Rear Seat Release

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

193

Содержание 2011 grand cherokee





















































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2011 grand cherokee

Отзывы:

Похожие инструкции для 2011 grand cherokee

Бренды по названию

Популярные бренды

Jeep 2011 grand cherokee, Руководство пользователя

Результаты поиска

Содержание 2011 grand cherokee

Отзывы:

Похожие инструкции для 2011 grand cherokee

Бренды по названию

Популярные бренды