Jeep 2008 Wrangler Скачать руководство пользователя страница 408

Страница: 408 / 466

hot or cold weather and other extreme conditions will
have an adverse effect on paint, metal trim, and under-
body protection.

The following maintenance recommendations will enable
you to obtain maximum benefit from the corrosion
resistance built into your vehicle.

What Causes Corrosion?

Corrosion is the result of deterioration or removal of
paint and protective coatings from your vehicle.

The most common causes are:

•

Road salt, dirt and moisture accumulation.

•

Stone and gravel impact.

•

Insects, tree sap and tar.

•

Salt in the air near sea-coast localities.

•

Atmospheric fallout/industrial pollutants.

•

Bird droppings.

Washing

•

Wash your vehicle regularly. Always wash your ve-
hicle in the shade using MOPAR

威

Car Wash or a mild

car wash soap, and rinse the panels completely with
clear water.

•

If insects, tar, or other similar deposits have accumu-
lated on your vehicle, use MOPAR

威

Super Kleen Bug

and Tar Remover to remove.

•

Use MOPAR

威

Cleaner Wax to remove road film,

stains, and to protect your paint finish. Take care never
to scratch the paint.

•

Avoid using abrasive compounds and power buffing
that may diminish the gloss or thin out the paint
finish.

MAINTAINING YOUR VEHICLE

407

Содержание 2008 Wrangler



















































































































































































































































































































































































































































































Результаты поиска

Содержание 2008 Wrangler

Отзывы:

Бренды по названию

Популярные бренды

Jeep 2008 Wrangler, Руководство пользователя

Результаты поиска

Содержание 2008 Wrangler

Отзывы:

Бренды по названию

Популярные бренды